- #Dbx driverack 260 setup custom serial
- #Dbx driverack 260 setup custom full
- #Dbx driverack 260 setup custom series
#Dbx driverack 260 setup custom series
Options: the RTA-M by dbx is an omni-directional, flat frequency measurement microphone specially designed for the Driverack series to pick up all frequencies from 20 Hz to 20 KHz, ensuring accurate real-time analysis of your audio.
#Dbx driverack 260 setup custom full
Im brand new to the DriveRack system, so this was a new experience for me, going from a rack full of gear to a single 1u device. Suffice it to say however, the 260 model came highly recommended by a friend who does huge stage setups.
#Dbx driverack 260 setup custom serial
260 RS-232 to USB Serial Adapter (Required if computer doesn’t have a serial port) Computer w/ RS-232 or USB Port dbx RS-232 Null Modem Cable NOTE: Not all USB to Serial Adapters will work with the 260. Options: the RTA-M by dbx is an omni-directional, flat frequency measurement microphone specially designed for the Driverack series to pick up all frequencies from 20 Hz to 20 KHz, ensuring accurate real-time analysis of your audio. Connect your computer to the DriveRack 260 using the included RS-232 Null Modem cable as shown in the below diagram. So, if Im running a high and low system and I want to crossover around 100 with a slope of 24db/octave do I set both the low and high crossover point at 100 or do I set the low point lower (say 98) and the high point higher (say 102) so that, graphically, the 'cross' point (considering the slope) is lower. full-time RTA real-time graphic spectrum analysis setup wizard with JBL speaker and Crown power amp tunings security lockout wall panel control inputs. On the Driverack 260 you can choose the crossover point and slope. SALT LAKE CITY, Utah HARMAN’s dbx DriveRack VENU360 Loudspeaker Management System, which enables a live or installed sound speaker system to be precisely optimized for the best-possible sound quality is now available.Successor to the industry-standard DriveRack 260, the new VENU360 adds a host of additional features. full bandpass, crossover and routing configurations SALT LAKE CITY, Utah HARMAN’s dbx DriveRack VENU360 Loudspeaker Management System, which enables a live or installed sound speaker system to be precisely optimized for the best-possible sound quality, is now available.2.8 seconds of alignment and zone delay.All of this results in a system that delivers optimal processing in a compact system.
The 260 offers two independent channels of processing power with a linkable 28-band graphic equalizer, industry-standard dbx stereo compressor module, feedback eliminator and the 120A Subharmonic Synthesizer on the input, with a 6-channel output system that includes parametric EQ, limiters that provide protection against speaker blowouts and alignment delay. The DBX Driverack 260 is no exception, in fact it draws a new line in the sand for quality and features. The 260 by dbx is a complete rackmount EQ and loudspeaker control system with limiters and real-time graphic spectrum analysis that help prevent damaging spikes in your audio, full GUI control and extensive bandpass, crossover and routing configurations.
0 kommentar(er)
